ALTOR

GUPHA Making

The cabinet was made with 18 mm. particleboard and consists of the two parts - LF ported  at the bottom, and MF open  box at the top.

6 inch wide range speaker have its own plate, mounted inside the baffle. This allow easy replacement, even if in the future will be decided to use another driver. In front this panel covered by grid:

At the beginning, port was installed outside - for easy tuning.

Nice view, isn t it ? :)

Time to start putty, sanding - preparing for painting

Now you can see where the woofer is located:

Crossover atop - for easy tuning

[Home] [News] [DIY & Hobby] [Articles] [Books & Docs] [Soft & Tools] [Trivia] [About&Contact]
Hosted by uCoz